Shandong Jiantong Geotechnical Materials Co., Ltd. | Geosynthetics manufacturer, Dezhou, Shandong, China Sales hotline +86 15605341818 (Mr. Wang) Chinese EN
Export & project enquiries +86 15605341818 Request a quote

Containment Applications & Lining Systems

Each application page presents the engineering pain points, the layer-by-layer material configuration, and the installation control points that determine long-term performance.

11 application typesLayer-by-layer configurationInstallation control pointsHotline +86 15605341818
Key facts

Lining systems for municipal solid waste landfills, rigid landfills, tailings impoundments, fly-ash yards, covered biogas digesters, reservoirs and storage ponds, decorative lakes, wastewater and oxidation ponds, tank farms, hydraulic slope protection and ecological restoration. Each system is configured layer by layer to the governing standard. For a project-specific configuration call +86 15605341818.

Standards: GB 16889-2024 · GB/T 17643-2025 · GB/T 17642-2025 · CJ/T 452-2014 · JG/T 193-2006 · JC/T 2884-2025

Municipal Solid Waste Landfill Lining

Composite liner system per GB 16889-2024: groundwater drainage layer, GCL or compacted clay auxiliary barrier, HDPE primary membrane (smooth on base, textured on slopes, ≥1.5 mm), leachate drainage layer and protection geotextile.

View lining system

Rigid Landfill Internal Lining

Reinforced-concrete cell lined internally with HDPE membrane. Critical controls are concrete surface preparation, vertical fixing with slack, and sealing at pipes and construction joints.

View lining system

Tailings Impoundment Lining

Composite liner with chemical-resistant selection based on tailings-water analysis: HDPE base and textured dam slopes (1.5–2.5 mm), GCL auxiliary barrier, drainage layers and polypropylene filters in alkaline media.

View lining system

Covered Biogas Digester (Black Membrane)

HDPE black membrane for base and gas cover (1.0–1.5 mm). Black absorbs heat to raise fermentation temperature; full weld gas-tightness testing and pressure-relief safety fittings are mandatory.

View lining system

Reservoir & Storage Pond Lining

Two-cloth-one-membrane composite (e.g. 300g/0.75mm) or membrane with geotextile layers for basin and slopes, with anchorage, ballast and special treatment of the water-level fluctuation zone.

View lining system

Decorative & Landscape Lake Lining

GCL bentonite liner (ecological, self-healing, supports planting) or composite membrane where higher retention is required, with cover soil and ecological bank detailing.

View lining system

Wastewater & Oxidation Pond Lining

Chemically resistant HDPE 1.5–2.0 mm for ponds and tanks, with rounded base/wall transitions, pre-installed pipe sleeves, and full weld plus flood testing.

View lining system

Tank Farm & Secondary Containment

Oil-resistant HDPE 1.5–2.5 mm under tanks and within bunds, with leak-detection layer on high-risk bases and a concrete wearing surface.

View lining system

Hydraulic Slope Protection

Graded protection by flow velocity: cement mat or rigid units at the toe and high-flow zones, ecological bags with geocell and geotextile filter on the face, with a complete drainage system first.

View lining system

Ecological Restoration & Revegetation

Soil amendment, terracing, drainage-first sequencing, then ecological bags, geocell and geotextile to stabilise slopes and establish vegetation, with irrigation and a defined maintenance period.

View lining system

Fly Ash Yard Lining

Alkaline leachate (pH often >9) requires alkali-resistant selection: HDPE liner with PP filtration, sub-liner groundwater drainage and monitoring wells, plus staged ash placement protection.

View lining system

Workshop Floor Containment

HDPE geomembrane barrier (1.5–2.5 mm) between a cushion layer and a concrete wearing slab, with dedicated sealing at slab joints, equipment bases, trenches and drains to stop oils and chemicals reaching soil and groundwater.

View lining system
☎ ✆ ↑